Humbrol Enamel Thinner (28ml)

  • Used to dilute Humbrol enamel paints
  • Most commonly used in airbrushing
  • Can also be used to clean brushes
  • Add to enamel pains to make them go further

More details

Warning: Last items in stock!

Enamel thinners are used to dilute our Humbrol solvent based enamel paints, most commonly for airbrushing. Also best for solvent for cleaning brushes. 

If the thinner is mixed with Humbrol enamel paints then they will apply to a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability)

Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry.

Enamel paint drying times are as follows: Gloss - 1-2 hours; Matt & Satin - 20-40 mins touch dry and up to 24 hours hard dry; Metallics - hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight).

Product Reviews
  • Number of Reviews : 6
  • Average Grade : 4.5 /5
  • A. Gordon
  •  the 23/08/2019
  • 4/5
always good to use the appropriate thinner. C&W should have checked the screw lid as there was a smell of thinners when I opened the package - just was screwed shut properly.
  • A. Stella
  •  the 15/12/2018
  • 4/5
Vital for Humbol enamel paint
  • B. Brenda
  •  the 18/01/2017
  • 4/5
did the job
  • J. Alan robert
  •  the 06/12/2016
  • 5/5
Very good, but I must admit I over ordered by me by mistake

from £2.50

Add to wishlist

By buying this product you can collect up to 2 loyalty points. Your cart will total 2 loyalty points that can be converted into a voucher of £0.02.




You may also like...