- Fast drying
- Temporarily adjustable
- Does not wrinkle paper
Suitable for use on wood, wood based materials, plastics (ABS, hard and soft PVC, Plexiglas®, polystyrene, Resopal®), metal, glass, porcelain, ceramic, leather, rubber, felt, cork, fabrics, cardboard, paper, many plastics and much more.
Do not use at temperatures below +5°C.
Materials to be glued must be clean, dry and free of dust and grease.
Preliminary surface treatment
When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first.
Directions for use
Apply the adhesive thinly to one side of the assembly, press the parts together - that's it! For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together.
Points of attention
Contains volatile, highly inflammable solvents. Appropriate precautions should therefore be taken during storage or when working with the adhesive.
Remove wet glue stains immediately. Dried glue residue and glue stains in clothing can be removed with acetone.
Store in a dry, cool and frost-free place.